Products

H5036 Low zinc antiwear hydraulic oil additive package

Date:2016-12-24 15:31 Writer:admin Hits:
------分隔线----------------------------

Product Introduction

a. It is prepared by many kinds of additives such as extreme pressure anti-wear agents, 

  antioxidants and corrosion inhibitors etc.

b. It is used to blend low-zinc, high-pressure anti wear hydraulic oil. 

c.  It has stable quality of excellent extreme pressure anti-wear property and 

   thermal oxidation stability.

d. The oil replacement intervals are significant extended.

Recommended Dosage

0.8%  (Need add anti-foam agent separately)

Product Parameter

Item

Technical data

Typical data

Test method

Kinematic viscosity40mm2/s

Actual measurement

42.36

GB/T 265

Density20g/cm3

0.9-1.1

1.0363

GB/T 1884

Flash point (opening)

≥ 100

130

GB/T 3536

Zinc content%

1.5-3.0

1.86

SH/T 0226

Sulphur content%

≥ 2.5

3.39

SH/T 0303

Phosphorus content%

≥ 3.0

3.83

SH/T 0296

 

Standard Compliance

GB 11118.1-2011         DIN 51524( Ⅱ )          DENISON HF-O

Packing and Storage

Packaging: Net weight: 200kg/drum. 

The maximum temperature should not exceed 60 for the storage, handling of the product and preparation of oil; for long-term storage, the maximum temperature should not exceed 45 This product is not flammable, explosive. No special preventative measure is required during use, but general preventive measures in handling of chemicals shall be followed. If the oil splashes onto skin, detergent, soap and water can be used to wash it away thoroughly.