Products

H5049 Lowered Odor Ash less Anti-wear Hydraulic oil Additive

Date:2016-12-24 15:18 Writer:Admin Hits:
------分隔线----------------------------

Product Introduction


1.H5049 lowered odor ash less anti-wear hydraulic oil additive package is a new generation upgrade product of our product H5039,and the formula is from Sinopec Research Institute of Petroleum Processing (RIPP).
It has good compatibility with base oil API II,III and synthetic oil and good stability in storage.
The quality reaches the same level of international product and could substitute the imported products

2.No zinc,no other metallic elements,

the product has excellent extreme pressure anti-wear properties and thermal oxidation stability.

3.It is beneficial to the reduction of the mechanical wear and tear, fuel consumption and cost.

4.Through the experiments of physical and chemical properties and high pressure pump bench evaluation,  it meets the requirements for the following standards:
    a. National Standard GB11118.1-2011 L-HM
    b. U.S.A. DENISON HF-0
    c.ISO11158-97
    d.Vickers m-2950-s DIN 51524(ll)
    e.Cincinnati milacron P-68P-69 P-70

Application

1.It can be used to prepare high pressure ash-less AW hydraulic oil of high grade with dosage of 0.8%    (anti-foam agent need be added additionally).

2.Hydraulic oils modulated by it are mainly applied in the hydraulic system with plunger pump 

 pressure>30.0Mpa and  vane pump pressure 14.0-17.5Mpa.

3.It is widely applied in metallurgy, plastics, mining, and the heavy dump truck, forming machine,  pressing machine and other mechanical hydraulic system.

4.It can be used to prepare premium extreme pressure ash-less anti-wear hydraulic oil whose viscosity grade are N32,N46,N68,N100 (Base oil is paraffin grade high viscosity index neutral oils-HVTS,HVIW)

Recommended Dosage

 0.8-1.0% (Anti-foaming agent need be added additionally)

Product Parameter

Item

Quality Index

Typical Data

Test Method

Density20g/cm3

1.0-1.1

1.05

GB/T2540

Viscosity,40 OC, mm2/s

report

20.31

GB/T265

Flash Point (opening)

≥100

148

GB/T3536

Sulfur %

≥7.5

8.04

SH/T0303

Phosphor %

≥3.0

3.35

SH/T0296

 

Packaging: Net weight: 200kg/drum. 

The maximum temperature should not exceed 60 ℃ for the storage, handling of the product and preparation of oil; for long term storage,

 the maximum temperature should not exceed 45 ℃, be sure not to touch water. This product is not flammable, explosive. General preventive measures in handling of chemicals shall be followed in the process of using. If the oil splashes onto skin, detergent, soap and water can be used to wash it thoroughly.