Products

H5039 Ashless antiwear hydraulic oil additive package

Date:2016-12-24 15:07 Writer:admin Hits:
------分隔线----------------------------

Product Introduction


1.This product is the newest type compound additive developed by RIPP for replacing the

    imported high-level products .

2.No zinc, no other metallic elements, the product has excellent extreme pressure 

   anti-wear properties and thermal oxidation stability.

3.It could reduce the mechanical wear and tear, fuel consumption and cost.

4.Through the experiments of physical &chemical properties and high pressure pump bench 

    evaluation,  it meets the requirements of the following standards:

    a. National Standard  GB11118.1-2011 L-HM
    b. U.S.A. DENISON HF-0
    c.ISO11158-97
    d.Vickers m-2950-s DIN 51524(ll)
    e.Cincinnati milacron P-68P-69 P-70

Application

1.It can be used to prepare high pressure ash-less AW hydraulic oil of high grade with dosage of 0.8%  (anti-foam agent need be added additionally).

2.Hydraulic oils blended by it are mainly applied in the hydraulic system with plunger pump 

    pressure>30.0Mpa and  vane pump pressure 14.0-17.5Mpa.

3. It can be used to prepare premium extreme pressure ash-less anti-wear hydraulic oil whose viscosity grade are N32,N46,N68,N100 (Base oil is paraffin grade high     viscosity index neutral oils-HVTS,HVIW)

4.It is widely applied in metallurgy, plastics, mining, and the heavy dump truck, forming machine, pressing machine and other mechanical hydraulic system.

Recommended Dosage

 0.8% (Anti-foaming agent should be added additionally)

Product Parameter

Item

Quality Index

Typical Value

Test Method

Density (20),g/cm3

1.0-1.1

1.040

GB/T1884

Kinematic Viscosity (40),mm2/s

25-40

30.45

GB/T265

Flash Point (open)

≥105

148

 GB/T3536

Sulfur content  S%

≥6.5

7.24

SH/T0303

Phosphor content P%

≥3.0

3.21

SH/T0296

Packaging and storage:

 200kg Zincing coat in closed package.


The maximum temperature should not exceed 60 ℃ for the storage, handling of the product and preparation of oil; for long term storage,

 the maximum temperature should not exceed 45 ℃, be sure not to touch water. This product is not flammable, explosive. General preventive measures in handling of chemicals shall be followed in the process of using. If the oil splashes onto skin, detergent, soap and water can be used to wash it thoroughly.